Xinje Plc Usb Driver Install May 2026

To install the USB driver for your , you typically need the XDPPro or XC Pro programming software , as the drivers are often bundled with these tools. 📥 1. Download Official Drivers

There’s nothing worse than sitting down at your machine, cable in hand, ready to upload a new program to your Xinje PLC—only to see the dreaded yellow exclamation mark in Device Manager. If you’re using a USB programming cable (often the XVP series or direct USB ports on newer XC/XD/XG models), Windows will not recognize the device automatically. xinje plc usb driver install

1. Extract the driver ZIP file to a folder (e.g., C:\Xinje_Driver).
2. Right-click the .inf file and select Install.
3. Wait for "Driver installed successfully".

• xr_usb.inf (Information file)
• xr_usb.sys (System driver)
• A folder called x64 (for 64-bit Windows) and x86 (for 32-bit).

"Xinje PLC USB Driver"

You should see or a specific COM Port assigned. 🔗 Software Configuration To install the USB driver for your ,

COM-USB Driver:

A standalone "COM-USB driver" is also available on the official site for specific converter cables. USB to RS232 Driver | USB Serial Driver Downloads and Tools Extract the driver ZIP file to a folder (e