Vw 1.2 Tsi Injector Removal //top\\ Site

Master the Pull: A Deep Dive into VW 1.2 TSI Injector Removal

Do not attempt this job with a standard 10mm socket and a prayer. You need specific tools, or you will snap the injector body and turn a $200 repair into a $1,000 head removal job. vw 1.2 tsi injector removal

1. Press the injectors into the cylinder head by hand until they seat.
2. Refit the fuel rail. Tighten the rail bolts to 20 Nm (15 ft-lbs) .
3. Reconnect the high-pressure line (tighten to 25 Nm).
4. Reinstall the intake manifold with a new gasket.

1. Turn the ignition ON (do not crank) for 5 seconds.
2. Turn OFF.
3. Repeat 3 times. This primes the fuel pump and detects leaks.
4. Start the engine. Let it idle. Check for fuel leaks around the injectors (smell for gas).

Here is a step-by-step guide for VW 1.2 TSI injector removal. Master the Pull: A Deep Dive into VW 1

If you grab the plastic body of the injector with pliers, you will break it. You need to break the carbon seal. Press the injectors into the cylinder head by

4-hour job

The VW 1.2 TSI injector removal is a for a first-timer, 90 minutes for a pro. The cost of DIY is ~$300 in tools and seals versus ~$1,500 at a dealer.