V2000-c Rfid: Access Control User Manual

V2000-C

The is a standalone RFID access control keypad designed for single-door security. It supports up to 1,000 users and utilizes 125KHz EM standard cards. 1. Core Specifications Operating Voltage: 12VDC ± 10%. Unlock Relay: 12VDC / 2A. Card Type: 125KHz EM standard RFID cards. User Capacity: Up to 1,000 users. Entry Modes: Card only, PIN only, or Card + PIN. 2. Setup and Programming

• Command: 13 [Seconds] # (Range: 1-99 seconds)
• Example: 13 8 # (8 seconds).

5.6 Add a Door Opening Delay (Alarm)

The V2000-c is a “set and forget” device, but proactive maintenance extends its life. V2000-c Rfid Access Control User Manual

V2000-C

The (often branded under Obo Hands or Youhe ) is a standalone RFID access control keypad used for single-door security. It supports up to 1,000 users and operates via 125KHz RFID cards, 4-digit PINs, or a combination of both. Quick Setup Guide V2000-C The is a standalone RFID access control

Here are some common issues and FAQs related to the V2000-C RFID access control system: Command: 13 [Seconds] # (Range: 1-99 seconds) Example:

• Red: DC 12V+ (Power)
• Black: GND (Power Ground)
• Yellow: NO (Normal Open – to Electric Strike)
• White: COM (Common – to Power Supply GND)
• Green: NC (Normal Closed – to Magnetic Lock)
• Blue/Brown: Exit Button (Short to GND to open)

• Power: 12–24 V DC
• Current: Idle ~50–150 mA, Active varies
• RFID frequency: 125 kHz or 13.56 MHz (model dependent)
• Operating temp: -20°C to +60°C
• Communication: Wiegand / RS485 / TCP/IP (model dependent)
• Relay: 3 A @ 30 VDC (verify on unit)