Thyssenkrupp Levant Stair Lift Installation Manual Top 【10000+ EXCLUSIVE】

Thyssenkrupp Levant Stair Lift Installation Manual Top Guidelines

2. Wiring the Limit Switches

• Live Load Limit: 350 lbs (159 kg). Exceeding this triggers the load sensor and locks the carriage.
• Obstruction Sensitivity: The Levant features dual-contact sensors (top/bottom of the footrest). During installation, any resistance exceeding 5 lbs will halt the unit. This is a feature, not a calibration error.
• Electrical Safety: The Levant uses a smart charger (Input: 100-240V AC, Output: 29V DC). You must install the supplied isolating wall socket within 36 inches (91 cm) of the top or bottom parking station—never on the moving rail.

1. Introduction

The official installation manual (Document Number: 790067 / Rev 5.0 or later) emphasizes a sequential process. Skipping steps, especially at the top rail junction, leads to misfiring limit switches or, worse, a chair that fails to charge, leaving you stranded upstairs. thyssenkrupp levant stair lift installation manual top

Key Installation Steps

• Two 12V 7Ah sealed lead-acid batteries (series = 24V).
• Connect red to +, black to - on carriage battery bracket.
• Torque battery terminals: 4 Nm max – overtightening cracks the lead post.

"Top" installation

The thyssenkrupp Levant stair lift is renowned in the accessibility industry for its modularity, reliability, and the sleek, unobtrusive design of its aluminum extrusion rail system. While the installation of the straight rail along the stringer (the diagonal support of the stairs) is a matter of precise measurement and bracket alignment, the true test of an installer's technical acumen often occurs at the summit: the . Live Load Limit: 350 lbs (159 kg)