Sound Blaster K3 Setup Portable

Setting up the Sound Blaster K3+ Go to product viewer dialog for this item.

Podcast/VO

| Scenario | Mic Gain | 48V | Reverb | Monitor Mix | Loopback | Noise Gate | | :--- | :--- | :--- | :--- | :--- | :--- | :--- | | | 1:00 | Off (Dynamic) | 0 | 10:00 (Voice focused) | Off | On (Low) | | Singing Live | 2:00 | On (Condenser) | 11:00 | 12:00 | On | On (High) | | Gaming (No mic) | N/A | Off | 0 | Full Right (Playback) | Off | N/A | | Karaoke (Phone) | 1:00 | On | 12:00 | 11:00 | On (For recording) | On | sound blaster k3 setup

: Ensure the headphone volume knob is turned up and that you are using a proper 1/4" adapter if your headphones have a 3.5mm plug. Device Not Recognized : Ensure you are using a USB 2.0 or 3.0 port; older USB 1.1 ports may not provide sufficient power. Humming/Buzzing grounding screw Setting up the Sound Blaster K3+ Go to

Instruments

: Plug a guitar or keyboard into the dedicated 1/4" high-Z TRS jack (shared with Mic 2). Humming/Buzzing grounding screw Instruments : Plug a guitar

Phantom Power (+48V):

If you are using a condenser microphone, press the +48V button . If using a dynamic mic, ensure this button is OFF to avoid damage.