Redsail Cutting Plotter Usb Driver Install -

Installing the RedSail Cutting Plotter USB Driver: A Step-by-Step Guide

"If auto installer not work, please manual update driver from device manager. Point to x64 folder."

Phase 6: Troubleshooting Common Issues

  • Ensure the plotter is properly connected to the computer: Make sure the plotter is turned on and the USB cable is securely connected to both the plotter and the computer.
  • Use a compatible USB port: Ensure that the USB port you are using is compatible with the plotter's USB cable.
  • Check for driver updates: Regularly check the Redsail website for driver updates to ensure you have the latest version.
  • Consult the plotter's documentation: Refer to the plotter's documentation for specific installation and configuration instructions.
  • Official RedSail (if still available): http://www.redsail.com.cn → Support → Cutting Plotter → USB Driver
  • Alternative / OEM match: Many RedSail plotters are rebranded (GCC, Liyu, RuiJie). The most compatible driver family is Liyu USB Driver (CH340/CP210x variant).
  • Backup: Use the Windows built-in usbser.sys for CDC mode.

Troubleshooting Tips

Plug the USB cable into your computer and the plotter, then turn the plotter on. Windows should detect new hardware. Run the Installer Run the driver executable file (e.g., CH341SER.EXE and wait for the "Driver install success" message. Verify the COM Port Device Manager on your PC. Expand the Ports (COM & LPT) redsail cutting plotter usb driver install