R329q V31 Firmware Upd Download ^new^ -

Essential Guide: R329Q V31 Firmware Update Download and Installation

1. Extract the Files: Unzip the downloaded folder. Look for a flash tool (often named Rockchip Batch Tool or PhoenixSuit depending on the chipset).
2. Install Drivers: Inside the folder, there should be a "Driver" subfolder. Install these so your computer recognizes the handheld when plugged in.
3. Load the Image:

   USB Male-to-Male Cable

   : Required to connect the box to your PC's USB port. 3. Step-by-Step Installation Guide

   1. Insert the USB drive with update.upd into the head unit’s USB port labeled “GPS” or “Firmware” (often the one marked with a wrench icon).
   2. On the unit, go to Settings > System > System Update (or “Upgrade”).
   3. Select Local Update or USB Update.
   4. The unit will detect update.upd and prompt “Firmware found. Update now?”
   5. Tap Confirm. The device will reboot into recovery mode automatically.
   6. A progress bar will appear. Do not turn off power. Wait 5–10 minutes.
   7. Upon completion, the unit will reboot. First boot takes longer (up to 5 minutes).