Hot Fix - Mt6768 Scatter File

MT6768 scatter file is a critical configuration document used to define the partition layout (e.g., preloader, recovery, system) for MediaTek devices like the Infinix Hot 10 Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. . It is primarily utilized with the SP Flash Tool

Investigation: MT6768 "scatter file hot"

  1. Remove the back cover of the phone. Locate the test points for the MT6768. Look for a pad labeled KCOL0, CLK, or CMD near the eMMC chip.
  2. Do not connect the USB yet.
  3. Open SP Flash Tool. Load your MT6768 scatter file. Select "Download Only" or "Format All + Download" (use Format All only if you have a backup of NVRAM).
  4. Click the Download button on the tool.
  5. The Hot Step: Using tweezers, short the test point to ground (usually a metal shield).
  6. While holding the short, plug the USB cable into the phone.
  7. Wait 2 seconds, then release the short.
  8. If successful, the PC will recognize MTK USB Port (VCOM) and SP Flash Tool will turn red, then purple, then yellow.

: You can generate a scatter file from an existing firmware dump using tools like the MTK META Utility or via Python-based tools like mt6768 scatter file hot

Use the preloader’s default partition table obtained from: MT6768 scatter file is a critical configuration document

exact

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | STATUS_EXT_RAM_EXCEPTION | Preloader mismatch or corrupted scatter base address. | Use a scatter from the build number. | | STATUS_SEC_PARTITION_SIZE_CHANGE | Partition size in scatter does not match the flash. | Edit the partition_size line in the scatter to match the phone’s backup. | | S_DL_GET_DRAM_SETTINGS_FAIL (5054) | DRAM initialization failed. The scatter file is for a different MT6768 sub-variant (e.g., MT6768V/CB vs MT6768V/CT). | Verify the CPU string via bootrom or testpoint. | | ERROR: STATUS_PRELOADER_INVALID | The preloader binary is corrupted or from a different security version. | Re-download the firmware. Do not force flash. | Remove the back cover of the phone

5.2 NVRAM / IMEI Loss

[Vendor] file = vendor.img address = 0x09000000 size = 0x02000000

For a developer, it's straightforward. For a casual user, it's a minefield. Loading the wrong scatter file—or one from a slightly different device variant—can lead to a permanent "hard brick." Compatibility: