Iclass K9k9 Software Update 【2026】

iClass K9K9

Updating your satellite receiver with the latest firmware is essential for fixing bugs, stabilizing signal reception, and enabling new features like Wi-Fi support or PVR recording. Preparation: What You Need A Compatible USB Drive : Formatted to FAT32 .

Wait:

Do not power off the device until the progress bar reaches 100% and the receiver reboots automatically. Method 2: RS232 Cable (For Troubleshooting) iclass k9k9 software update

Version History: What’s New in the Latest Update?

Method C: OSDP Secure Channel Update

  1. Download HID Reader Manager from Google Play or Apple App Store.
  2. Enable Bluetooth and location permissions (Android 12+ requires location for Bluetooth scanning).
  3. Power the iClass reader (12V DC or via PoE if using iClass SE).
  4. Open the app → tap “Discover” → select your reader by its serial number.
  5. Once connected, navigate to Settings > Firmware Update.
  6. Tap “Select File” and choose the k9k9_v2.6.3.bin (or appropriate filename).
  7. The app will verify the cryptographic signature. If it says “Invalid Signature,” do not proceed.
  8. Initiate the update. Do not power cycle the reader for 90 seconds.
  9. Upon completion, the reader will reboot and beep three times.
  10. Reconnect and verify the new version under “Device Info”.

If "K9K9" is a specific clone or module from a non-HID source, you may need the original vendor's tools—and be aware that modifying such devices may violate IP or security policies. iClass K9K9 Updating your satellite receiver with the