Upd - H-ig41-uatx Rev 1.1 Manual

H-IG41-uATX rev 1.1

The (also known as the HP/Foxconn Eton ) is a budget-friendly LGA775 motherboard originally designed for HP and Compaq systems like the HP 500B Microtower . While reliable for basic tasks, it has specific hardware quirks—particularly regarding memory and SSD compatibility—that you should know before building or upgrading. ⚙️ Core Technical Specifications

Here are the key features of the H-IG41-UATX Rev 1.1 motherboard: h-ig41-uatx rev 1.1 manual

• Layout diagram – showing CPU socket, RAM slots, PCIe x16, PCI, SATA ports, front panel header, CMOS battery.
• Jumper settings – clearing CMOS (usually pins 2-3 for reset).
• Front panel pinout – Power SW, Reset, HDD LED, Power LED (often a 9-pin block).
• BIOS settings – standard, advanced, chipset, boot, and power management sections.
• CPU support list – Core 2 Quad Q9000 series, Pentium Dual-Core, Celeron 400 series.
• Maximum RAM – 8GB DDR3 (2 slots, 1333/1066/800 MHz).
• Integrated I/O – VGA, COM port header, PS/2 keyboard+mouse, USB 2.0, audio jacks (Realtek ALC662).
• SATA mode – IDE (default) or AHCI (no RAID).

Q1: Is the H-IG41-uATX Rev 1.1 manual the same as Rev 1.0?

Q: Can I use a Core i3/i5 on this board?

A: No. LGA775 is completely different from LGA1156/1155. H-IG41-uATX rev 1

5. Common Problems & Manual-Based Solutions

No.

Rev 1.0 used DDR2 memory, while Rev 1.1 uses DDR3. The pinout for the front panel also changed. Always use the Rev 1.1-specific manual. Layout diagram – showing CPU socket, RAM slots,

⚠️ If no jumper exists, touch both pins with a flathead screwdriver for 5 seconds (power off, PSU unplugged).