Epson Adjustment Program L1250 !new! [ RECOMMENDED ]

You're looking for information on the Epson Adjustment Program for the L1250 printer. Here's what I found:

Recommended sources:

• Physically inspect/replace/clean the waste-ink pads or provide an external waste-ink bottle before resetting counters.
• Back up any configurable settings you change.
• Use the version of the adjustment tool explicitly labelled for L1250 and the same firmware family.
• Avoid downloading software from untrusted sites; scan files for malware.

Ink Pad Counter

| Function | Description | Warning | | :--- | :--- | :--- | | | Resets the "Service Required" error. | Dangerous. Do not reset this unless you have physically replaced/cleaned the waste ink pads or installed an external waste ink tank. | | Head Cleaning | Runs a more thorough cleaning cycle than the standard driver. | Uses a significant amount of ink. Do not overuse. | | Ink Charge | Fills the ink lines. Only use if you replaced the mainboard or tubes. | Uses massive amounts of ink. Do not click randomly. | | Initial Setting | Resets the printer to factory defaults. | Can uncalibrate the printer. Only use after mainboard replacement. | | USB ID Input | Writes serial number to the mainboard. | Only for technicians replacing boards. | epson adjustment program l1250

If your L1250 is showing a "Service Required" error, follow these steps to reset it: How to Reset Epson L1250 with Resetter You're looking for information on the Epson Adjustment