Canon G3400 Reset -
Canon PIXMA G3400
To reset your , you likely need to clear the 5B00 error , which indicates that the ink absorber (or "diaper") is full. Manual Reset Procedure (Service Mode)
If you refilled your ink tanks but the printer still warns you of low ink, you must reset the internal notification counter to prevent the print heads from running dry. canon g3400 reset
: While still holding the Power button, release the Stop button. The 5-Press Sequence : While holding Power, press the Stop button Release All Canon PIXMA G3400 To reset your , you
On her laptop, she ran the downloaded (and decidedly sketchy-looking) “Canon Service Tool V3400.exe.” Her antivirus screamed. She silenced it. This was war. Turn off the printer and unplug it from
Additional Tips
Offers a "Main" ink counter reset with a single click and allows for nozzle cleaning and deep ink flushes.
- Turn off the printer and unplug it from the power source
- Wait for at least 30 seconds to allow any residual power to drain
- Ensure that all ink tanks are properly seated and filled
- Connect the printer to a PC via USB.
- Open the Service Tool software.
- Select the USB port.
- Under "Ink Absorber Counter," click Main and Platen to reset the counters to zero.
- Click "Test Print" to verify.
Canon PIXMA G3400
To reset your , you likely need to clear the 5B00 error , which indicates that the ink absorber (or "diaper") is full. Manual Reset Procedure (Service Mode)
If you refilled your ink tanks but the printer still warns you of low ink, you must reset the internal notification counter to prevent the print heads from running dry.
: While still holding the Power button, release the Stop button. The 5-Press Sequence : While holding Power, press the Stop button Release All
On her laptop, she ran the downloaded (and decidedly sketchy-looking) “Canon Service Tool V3400.exe.” Her antivirus screamed. She silenced it. This was war.
Additional Tips
Offers a "Main" ink counter reset with a single click and allows for nozzle cleaning and deep ink flushes.
- Turn off the printer and unplug it from the power source
- Wait for at least 30 seconds to allow any residual power to drain
- Ensure that all ink tanks are properly seated and filled
- Connect the printer to a PC via USB.
- Open the Service Tool software.
- Select the USB port.
- Under "Ink Absorber Counter," click Main and Platen to reset the counters to zero.
- Click "Test Print" to verify.
