While a direct PDF download of the manual is not readily available through common public repositories , it is a standard manual charger (often 60A/10A/2A) used for charging and jump-starting 6V and 12V lead-acid batteries. Quick Setup Guide
| Feature | Specification | | :--- | :--- | | | AC60CR | | Input Voltage | 120V AC, 60Hz, ~2.5A | | Output Charging | 12V DC, 2A / 15A / 40A | | Engine Start | 60A peak (for 5 seconds) | | Battery Types | Standard (Flooded), AGM, Gel, Deep Cycle | | Protections | Reverse polarity, short circuit, overheat, overcharge | | Display | Digital LED + Backlit LCD (on some variants) |
: Always charge in a well-ventilated area due to the risk of explosive hydrogen gas. Frozen Batteries
While a direct digital copy of the manual is not universally hosted under that specific model name, this charger is a 6/12V dual-rate manual unit often rebranded from standard designs. You can find general Autocraft 1.5A–6A charger manuals on several documentation sites that cover identical safety and operation procedures. Core Operation Guide for Autocraft AC60CR
By providing access to the Autocraft Battery Charger AC60CR manual and highlighting key safety precautions and troubleshooting procedures, this report aims to promote safe and effective use of the device.
: If the clamps are connected incorrectly, a warning light will typically illuminate; swap the clamps immediately. Acro Engineering Incorporation Safety Precautions Battery Charger - Faithfull Tools