Achi Ir6500 Software Hot ((link))

ACHI IR6500 software is a specialized PC interface designed to manage the ACHI IR6500 BGA Rework Station

The Fix:

Always secure the thermocouple bead directly against the board right next to the BGA chip using high-temperature Kapton tape. If the software reads room temperature while the heater is glowing red, replace the thermocouple immediately. 4. Solid State Relay (SSR) Failure achi ir6500 software hot

• Passive Throttle Temp: 70°C (default is often 85°C – too high for fanless)
• Critical Shutdown Temp: 85°C
• Apply and reboot.

: The original internal USB-to-serial circuit is often cited as unreliable. Users frequently encounter issues where the COM port is not recognized, particularly on Windows 11 Legacy Design ACHI IR6500 software is a specialized PC interface

1. Let the camera warm up: Turn on the IR6500 for 10 minutes before critical measurements to stabilize the microbolometer.
2. Use a tripod: Blurry thermal images lead to false hot spots. The software cannot correct motion blur.
3. Set a reference: In the software, always mark a "Known Good" component to compare against the suspect hot spot.
4. Export CSV data: For engineering reports, use the software's Export to Excel feature to graph temperature trends over time.

Conclusion

Problem 1: “No Device Found” / “Hot Plug Failed”

Rework Pro

: A popular third-party alternative available at Black Horse Repairs . It offers features like community-shared profiles and requires no additional drivers for modern systems. Installation & Compatibility #95 | IR6500 Rework Station Software (PC410 Controller) Passive Throttle Temp: 70°C (default is often 85°C